dmesg - AMD A8-6600K APU - Gigabyte NVIDIA GeForce GT 1030

Return To AMD A8-6600K APU - Gigabyte NVIDIA GeForce GT 1030 System Information

Linux version 5.3.0-59-generic (buildd@lcy01-amd64-025) (gcc version 7.5.0 (Ubuntu 7.5.0-3ubuntu1~18.04)) #53~18.04.1-Ubuntu SMP Thu Jun 4 14:58:26 UTC 2020 (Ubuntu 5.3.0-59.53~18.04.1-generic 5.3.18)
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Hygon HygonGenuine
  Centaur CentaurHauls
  zhaoxin   Shanghai  
random: get_random_u32 called from bsp_init_amd+0x207/0x2c0 with crng_init=0
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x0000000000100000-0x00000000dcc7efff] usable
BIOS-e820: [mem 0x00000000dcc7f000-0x00000000dcf5dfff] reserved
BIOS-e820: [mem 0x00000000dcf5e000-0x00000000dcf6dfff] ACPI data
BIOS-e820: [mem 0x00000000dcf6e000-0x00000000dd72ffff] ACPI NVS
BIOS-e820: [mem 0x00000000dd730000-0x00000000de591fff] reserved
BIOS-e820: [mem 0x00000000de592000-0x00000000de592fff] usable
BIOS-e820: [mem 0x00000000de593000-0x00000000de798fff] ACPI NVS
BIOS-e820: [mem 0x00000000de799000-0x00000000debd0fff] usable
BIOS-e820: [mem 0x00000000debd1000-0x00000000deff3fff] reserved
BIOS-e820: [mem 0x00000000deff4000-0x00000000deffffff] usable
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000041effffff] usable
NX (Execute Disable) protection: active
e820: update [mem 0x92104018-0x92123457] usable ==> usable
e820: update [mem 0x92104018-0x92123457] usable ==> usable
e820: update [mem 0x920f6018-0x92103057] usable ==> usable
e820: update [mem 0x920f6018-0x92103057] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable
reserve setup_data: [mem 0x0000000000100000-0x00000000920f6017] usable
reserve setup_data: [mem 0x00000000920f6018-0x0000000092103057] usable
reserve setup_data: [mem 0x0000000092103058-0x0000000092104017] usable
reserve setup_data: [mem 0x0000000092104018-0x0000000092123457] usable
reserve setup_data: [mem 0x0000000092123458-0x00000000dcc7efff] usable
reserve setup_data: [mem 0x00000000dcc7f000-0x00000000dcf5dfff] reserved
reserve setup_data: [mem 0x00000000dcf5e000-0x00000000dcf6dfff] ACPI data
reserve setup_data: [mem 0x00000000dcf6e000-0x00000000dd72ffff] ACPI NVS
reserve setup_data: [mem 0x00000000dd730000-0x00000000de591fff] reserved
reserve setup_data: [mem 0x00000000de592000-0x00000000de592fff] usable
reserve setup_data: [mem 0x00000000de593000-0x00000000de798fff] ACPI NVS
reserve setup_data: [mem 0x00000000de799000-0x00000000debd0fff] usable
reserve setup_data: [mem 0x00000000debd1000-0x00000000deff3fff] reserved
reserve setup_data: [mem 0x00000000deff4000-0x00000000deffffff] usable
reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
reserve setup_data: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
reserve setup_data: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
reserve setup_data: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x000000041effffff] usable
efi: EFI v32.31 by American Megatrends
efi:  ACPI=0xdcf65000  ACPI 2.0=0xdcf65000  SMBIOS=0xf04c0  MPS=0xfd4e0 
secureboot: Secure boot disabled
SMBIOS 2.7 present.
DMI: System manufacturer System Product Name/A88XM-A, BIOS 1801 08/25/2014
tsc: Fast TSC calibration using PIT
tsc: Detected 3890.237 MHz processor
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x41f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF write-through
  C0000-CEFFF write-protect
  CF000-DFFFF uncachable
  E0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000000 mask FFFF80000000 write-back
  1 base 000080000000 mask FFFFC0000000 write-back
  2 base 0000C0000000 mask FFFFF0000000 write-back
  3 base 0000D0000000 mask FFFFF8000000 write-back
  4 base 0000D8000000 mask FFFFFC000000 write-back
  5 base 0000DC000000 mask FFFFFE000000 write-back
  6 base 0000DE000000 mask FFFFFF000000 write-back
  7 disabled
TOM2: 000000041f000000 aka 16880M
x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
e820: update [mem 0xdf000000-0xffffffff] usable ==> reserved
last_pfn = 0xdf000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd860-0x000fd86f]
check: Scanning 1 areas for low memory corruption
Using GB pages for direct mapping
BRK [0x166001000, 0x166001fff] PGTABLE
BRK [0x166002000, 0x166002fff] PGTABLE
BRK [0x166003000, 0x166003fff] PGTABLE
BRK [0x166004000, 0x166004fff] PGTABLE
BRK [0x166005000, 0x166005fff] PGTABLE
BRK [0x166006000, 0x166006fff] PGTABLE
BRK [0x166007000, 0x166007fff] PGTABLE
BRK [0x166008000, 0x166008fff] PGTABLE
BRK [0x166009000, 0x166009fff] PGTABLE
BRK [0x16600a000, 0x16600afff] PGTABLE
BRK [0x16600b000, 0x16600bfff] PGTABLE
RAMDISK: [mem 0x393ab000-0x3d493fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000DCF65000 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000DCF65078 00006C (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: FACP 0x00000000DCF6B9D8 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20190703/tbfadt-624)
ACPI: DSDT 0x00000000DCF65180 006855 (v02 ALASKA A M I    00000000 INTL 20051117)
ACPI: FACS 0x00000000DD725080 000040
ACPI: APIC 0x00000000DCF6BAE8 000072 (v03 ALASKA A M I    01072009 AMI  00010013)
ACPI: FPDT 0x00000000DCF6BB60 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: MCFG 0x00000000DCF6BBA8 00003C (v01 ALASKA A M I    01072009 MSFT 00010013)
ACPI: HPET 0x00000000DCF6BBE8 000038 (v01 ALASKA A M I    01072009 AMI  00000005)
ACPI: CRAT 0x00000000DCF6CD08 000578 (v01 AMD    BANTRY   00000001 AMD  00000001)
ACPI: BGRT 0x00000000DCF6BC78 000038 (v00 ALASKA A M I    01072009 AMI  00010013)
ACPI: SSDT 0x00000000DCF6BCB0 000B9C (v01 AMD    BANTRY   00000001 AMD  00000001)
ACPI: SSDT 0x00000000DCF6C850 0004B7 (v02 AMD    BANTRY   00000001 MSFT 04000000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000041effffff]
NODE_DATA(0) allocated [mem 0x41efd5000-0x41effffff]
Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
  Normal   [mem 0x0000000100000000-0x000000041effffff]
  Device   empty
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000001000-0x000000000009ffff]
  node   0: [mem 0x0000000000100000-0x00000000dcc7efff]
  node   0: [mem 0x00000000de592000-0x00000000de592fff]
  node   0: [mem 0x00000000de799000-0x00000000debd0fff]
  node   0: [mem 0x00000000deff4000-0x00000000deffffff]
  node   0: [mem 0x0000000100000000-0x000000041effffff]
Zeroed struct page in unavailable ranges: 16285 pages
Initmem setup node 0 [mem 0x0000000000001000-0x000000041effffff]
On node 0 totalpages: 4178019
  DMA zone: 64 pages used for memmap
  DMA zone: 24 pages reserved
  DMA zone: 3999 pages, LIFO batch:0
  DMA32 zone: 14084 pages used for memmap
  DMA32 zone: 901316 pages, LIFO batch:63
  Normal zone: 51136 pages used for memmap
  Normal zone: 3272704 pages, LIFO batch:63
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228210 base: 0xfed00000
efi_bgrt: Ignoring BGRT: invalid image address
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x920f6000-0x920f6fff]
PM: Registered nosave memory: [mem 0x92103000-0x92103fff]
PM: Registered nosave memory: [mem 0x92104000-0x92104fff]
PM: Registered nosave memory: [mem 0x92123000-0x92123fff]
PM: Registered nosave memory: [mem 0xdcc7f000-0xdcf5dfff]
PM: Registered nosave memory: [mem 0xdcf5e000-0xdcf6dfff]
PM: Registered nosave memory: [mem 0xdcf6e000-0xdd72ffff]
PM: Registered nosave memory: [mem 0xdd730000-0xde591fff]
PM: Registered nosave memory: [mem 0xde593000-0xde798fff]
PM: Registered nosave memory: [mem 0xdebd1000-0xdeff3fff]
PM: Registered nosave memory: [mem 0xdf000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfed7ffff]
PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
PM: Registered nosave memory: [mem 0xfed90000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[mem 0xdf000000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u524288
pcpu-alloc: s184320 r8192 d28672 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 
Built 1 zonelists, mobility grouping on.  Total pages: 4112711
Policy zone: Normal
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
mem auto-init: stack:off, heap alloc:on, heap free:off
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16040864K/16712076K available (14339K kernel code, 2369K rwdata, 4672K rodata, 2664K init, 5072K bss, 671212K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
ftrace: allocating 43324 entries in 170 pages
rcu: Hierarchical RCU implementation.
rcu: 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
	Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16
vt handoff: transparent VT on vt#1
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20190703
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
APIC: Switch to symmetric I/O mode setup
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x7026a873446, max_idle_ns: 881590842930 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 7780.47 BogoMIPS (lpj=15560948)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Yama: becoming mindful.
AppArmor: AppArmor initialized
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
*** VALIDATE proc ***
*** VALIDATE cgroup1 ***
*** VALIDATE cgroup2 ***
Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Full AMD retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
Freeing SMP alternatives memory: 40K
smpboot: CPU0: AMD A8-6600K APU with Radeon(tm) HD Graphics (family: 0x15, model: 0x13, stepping: 0x1)
Performance Events: Fam15h core perfctr, AMD PMU driver.
... version:                0
... bit width:              48
... generic registers:      6
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   0
... event mask:             000000000000003f
rcu: Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node  #0, CPUs:      #1 #2 #3
smp: Brought up 1 node, 4 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 4 processors activated (31121.89 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0xdcf6e000-0xdd72ffff] (8134656 bytes)
PM: Registering ACPI NVS region [mem 0xde593000-0xde798fff] (2121728 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 21:24:19, date: 2020-06-23
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1592947458.148:1): state=initialized audit_enabled=0 res=1
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 3 ACPI AML tables successfully acquired and loaded
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 8 GPEs in block 00 to 1F
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
acpi PNP0A03:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME LTR]
acpi PNP0A03:00: _OSC: OS now controls [AER PCIeCapability]
acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1022:1410] type 00 class 0x060000
pci 0000:00:02.0: [1022:1412] type 01 class 0x060400
pci 0000:00:02.0: enabling Extended Tags
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
pci 0000:00:10.0: reg 0x10: [mem 0xfe206000-0xfe207fff 64bit]
pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
pci 0000:00:10.1: [1022:7814] type 00 class 0x0c0330
pci 0000:00:10.1: reg 0x10: [mem 0xfe204000-0xfe205fff 64bit]
pci 0000:00:10.1: PME# supported from D0 D3hot D3cold
pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
pci 0000:00:11.0: reg 0x10: [io  0xf040-0xf047]
pci 0000:00:11.0: reg 0x14: [io  0xf030-0xf033]
pci 0000:00:11.0: reg 0x18: [io  0xf020-0xf027]
pci 0000:00:11.0: reg 0x1c: [io  0xf010-0xf013]
pci 0000:00:11.0: reg 0x20: [io  0xf000-0xf00f]
pci 0000:00:11.0: reg 0x24: [mem 0xfe20c000-0xfe20c7ff]
pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xfe20b000-0xfe20bfff]
pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xfe20a000-0xfe20a0ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xfe209000-0xfe209fff]
pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xfe208000-0xfe2080ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xfe200000-0xfe203fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
pci 0000:00:15.0: [1022:43a0] type 01 class 0x060400
pci 0000:00:15.0: enabling Extended Tags
pci 0000:00:15.0: supports D1 D2
pci 0000:00:15.0: PME# supported from D0 D3hot D3cold
pci 0000:00:15.2: [1022:43a2] type 01 class 0x060400
pci 0000:00:15.2: enabling Extended Tags
pci 0000:00:15.2: supports D1 D2
pci 0000:00:15.2: PME# supported from D0 D3hot D3cold
pci 0000:00:18.0: [1022:1400] type 00 class 0x060000
pci 0000:00:18.1: [1022:1401] type 00 class 0x060000
pci 0000:00:18.2: [1022:1402] type 00 class 0x060000
pci 0000:00:18.3: [1022:1403] type 00 class 0x060000
pci 0000:00:18.4: [1022:1404] type 00 class 0x060000
pci 0000:00:18.5: [1022:1405] type 00 class 0x060000
pci 0000:01:00.0: [10de:1d01] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io  0xe000-0xe07f]
pci 0000:01:00.0: reg 0x30: [mem 0xfe000000-0xfe07ffff pref]
pci 0000:01:00.0: enabling Extended Tags
pci 0000:01:00.0: BAR 3: assigned to efifb
pci 0000:01:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x4 link at 0000:00:02.0 (capable of 31.504 Gb/s with 8 GT/s x4 link)
pci 0000:01:00.1: [10de:0fb8] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xfe080000-0xfe083fff]
pci 0000:01:00.1: enabling Extended Tags
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:02.0:   bridge window [mem 0xfd000000-0xfe0fffff]
pci 0000:00:02.0:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
pci_bus 0000:02: extended config space not accessible
pci 0000:00:14.4: PCI bridge to [bus 02] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0x0000-0x03af window] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0x03e0-0x0cf7 window] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0x03b0-0x03df window] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0xe0000000-0xffffffff window] (subtractive decode)
pci 0000:00:15.0: PCI bridge to [bus 03]
pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:04:00.0: reg 0x10: [io  0xd000-0xd0ff]
pci 0000:04:00.0: reg 0x18: [mem 0xfe100000-0xfe100fff 64bit]
pci 0000:04:00.0: reg 0x20: [mem 0xf2100000-0xf2103fff 64bit pref]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:15.2: PCI bridge to [bus 04]
pci 0000:00:15.2:   bridge window [io  0xd000-0xdfff]
pci 0000:00:15.2:   bridge window [mem 0xfe100000-0xfe1fffff]
pci 0000:00:15.2:   bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 6 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 6 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 6 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 6 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 6 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 10 11 14 15) *0
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:01:00.0: vgaarb: setting as boot VGA device
pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:01:00.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
PTP clock support registered
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x920f6018-0x93ffffff]
e820: reserve RAM buffer [mem 0x92104018-0x93ffffff]
e820: reserve RAM buffer [mem 0xdcc7f000-0xdfffffff]
e820: reserve RAM buffer [mem 0xde593000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdebd1000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
e820: reserve RAM buffer [mem 0x41f000000-0x41fffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
*** VALIDATE hugetlbfs ***
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io  0x0300-0x031f] has been reserved
system 00:01: [io  0x0290-0x029f] has been reserved
system 00:01: [io  0x0230-0x023f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io  0x04d0-0x04d1] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: [dma 0 disabled]
pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:06: [io  0x04d0-0x04d1] has been reserved
system 00:06: [io  0x040b] has been reserved
system 00:06: [io  0x04d6] has been reserved
system 00:06: [io  0x0c00-0x0c01] has been reserved
system 00:06: [io  0x0c14] has been reserved
system 00:06: [io  0x0c50-0x0c51] has been reserved
system 00:06: [io  0x0c52] has been reserved
system 00:06: [io  0x0c6c] has been reserved
system 00:06: [io  0x0c6f] has been reserved
system 00:06: [io  0x0cd0-0x0cd1] has been reserved
system 00:06: [io  0x0cd2-0x0cd3] has been reserved
system 00:06: [io  0x0cd4-0x0cd5] has been reserved
system 00:06: [io  0x0cd6-0x0cd7] has been reserved
system 00:06: [io  0x0cd8-0x0cdf] has been reserved
system 00:06: [io  0x0800-0x089f] has been reserved
system 00:06: [io  0x0b20-0x0b3f] has been reserved
system 00:06: [io  0x0900-0x090f] has been reserved
system 00:06: [io  0x0910-0x091f] has been reserved
system 00:06: [io  0xfe00-0xfefe] has been reserved
system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:06: [mem 0xfed80000-0xfed8ffff] has been reserved
system 00:06: [mem 0xfed61000-0xfed70fff] has been reserved
system 00:06: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:06: [mem 0xff000000-0xffffffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 9 devices
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
thermal_sys: Registered thermal governor 'power_allocator'
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:02.0:   bridge window [mem 0xfd000000-0xfe0fffff]
pci 0000:00:02.0:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 02]
pci 0000:00:15.0: PCI bridge to [bus 03]
pci 0000:00:15.2: PCI bridge to [bus 04]
pci 0000:00:15.2:   bridge window [io  0xd000-0xdfff]
pci 0000:00:15.2:   bridge window [mem 0xfe100000-0xfe1fffff]
pci 0000:00:15.2:   bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0xe0000000-0xffffffff window]
pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfd000000-0xfe0fffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
pci_bus 0000:02: resource 4 [io  0x0000-0x03af window]
pci_bus 0000:02: resource 5 [io  0x03e0-0x0cf7 window]
pci_bus 0000:02: resource 6 [io  0x03b0-0x03df window]
pci_bus 0000:02: resource 7 [io  0x0d00-0xffff window]
pci_bus 0000:02: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:02: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:02: resource 10 [mem 0xe0000000-0xffffffff window]
pci_bus 0000:04: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:04: resource 1 [mem 0xfe100000-0xfe1fffff]
pci_bus 0000:04: resource 2 [mem 0xf2100000-0xf21fffff 64bit pref]
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x6a0 took 35259 usecs
pci 0000:00:12.2: PME# does not work under D3, disabling it
pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x6a0 took 31062 usecs
pci 0000:00:13.2: PME# does not work under D3, disabling it
pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 66468K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0xcb4bb000-0xcf4bb000] (64MB)
amd_uncore: AMD NB counters detected
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000000ff)
check: Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=22 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse: init (API version 7.31)
Platform Keyring initialized
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
io scheduler mq-deadline registered
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
efifb: probing for efifb
efifb: No BGRT, not showing boot graphics
efifb: framebuffer at 0xf1000000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
fbcon: Deferring console take-over
fb0: EFI VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
QUIRK: Enable AMD PLL fix
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xfe20a000
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 5.3.0-59-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 17, io mem 0xfe208000
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 5.3.0-59-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:12.0: OHCI PCI host controller
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
ohci-pci 0000:00:12.0: irq 18, io mem 0xfe20b000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.03
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI PCI host controller
usb usb3: Manufacturer: Linux 5.3.0-59-generic ohci_hcd
usb usb3: SerialNumber: 0000:00:12.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 5 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 4
ohci-pci 0000:00:13.0: irq 18, io mem 0xfe209000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.03
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI PCI host controller
usb usb4: Manufacturer: Linux 5.3.0-59-generic ohci_hcd
usb usb4: SerialNumber: 0000:00:13.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 5
xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x0000000000000418
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 5.3.0-59-generic xhci-hcd
usb usb5: SerialNumber: 0000:00:10.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 6
xhci_hcd 0000:00:10.0: Host supports USB 3.0 SuperSpeed
usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.03
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 5.3.0-59-generic xhci-hcd
usb usb6: SerialNumber: 0000:00:10.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.1: xHCI Host Controller
xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 7
xhci_hcd 0000:00:10.1: hcc params 0x014040c3 hci version 0x100 quirks 0x0000000000000418
usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: xHCI Host Controller
usb usb7: Manufacturer: Linux 5.3.0-59-generic xhci-hcd
usb usb7: SerialNumber: 0000:00:10.1
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.1: xHCI Host Controller
xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 8
xhci_hcd 0000:00:10.1: Host supports USB 3.0 SuperSpeed
usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb8: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.03
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: xHCI Host Controller
usb usb8: Manufacturer: Linux 5.3.0-59-generic xhci-hcd
usb usb8: SerialNumber: 0000:00:10.1
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: registered as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Cannot allocate resource for mainboard
platform eisa.0: Cannot allocate resource for EISA slot 1
platform eisa.0: Cannot allocate resource for EISA slot 2
platform eisa.0: Cannot allocate resource for EISA slot 3
platform eisa.0: Cannot allocate resource for EISA slot 4
platform eisa.0: Cannot allocate resource for EISA slot 5
platform eisa.0: Cannot allocate resource for EISA slot 6
platform eisa.0: Cannot allocate resource for EISA slot 7
platform eisa.0: Cannot allocate resource for EISA slot 8
platform eisa.0: EISA: Detected 0 cards
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending.
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
RAS: Correctable Errors collector initialized.
microcode: CPU0: patch_level=0x06001119
microcode: CPU1: patch_level=0x06001119
microcode: CPU2: patch_level=0x06001119
microcode: CPU3: patch_level=0x06001119
microcode: Microcode Update Driver: v2.2.
sched_clock: Marking stable (1503304989, 183935)->(1525042126, -21553202)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: af4edce67ea39e8b87d588de39e116f8bd66e2df'
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
ima: Allocated hash algorithm: sha1
No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.apparmor
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
PM:   Magic number: 8:332:450
 machinecheck: hash matches
rtc_cmos 00:02: setting system clock to 2020-06-23T21:24:20 UTC (1592947460)
acpi_cpufreq: overriding BIOS provided _PSD data
Freeing unused decrypted memory: 2040K
Freeing unused kernel image memory: 2664K
Write protecting the kernel read-only data: 22528k
Freeing unused kernel image memory: 2008K
Freeing unused kernel image memory: 1472K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Using register 0x2e for SMBus port selection
piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0300 32 slots 8 ports 6 Gbps 0xff impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio 
scsi host0: ahci
scsi host1: ahci
libphy: r8169: probed
r8169 0000:04:00.0 eth0: RTL8168g/8111g, f0:79:59:6e:12:57, XID 4c0, IRQ 38
r8169 0000:04:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
scsi host6: ahci
scsi host7: ahci
ata1: SATA max UDMA/133 abar m2048@0xfe20c000 port 0xfe20c100 irq 37
ata2: SATA max UDMA/133 abar m2048@0xfe20c000 port 0xfe20c180 irq 37
ata3: SATA max UDMA/133 abar m2048@0xfe20c000 port 0xfe20c200 irq 37
ata4: SATA max UDMA/133 abar m2048@0xfe20c000 port 0xfe20c280 irq 37
ata5: SATA max UDMA/133 abar m2048@0xfe20c000 port 0xfe20c300 irq 37
ata6: SATA max UDMA/133 abar m2048@0xfe20c000 port 0xfe20c380 irq 37
ata7: SATA max UDMA/133 abar m2048@0xfe20c000 port 0xfe20c400 irq 37
ata8: SATA max UDMA/133 abar m2048@0xfe20c000 port 0xfe20c480 irq 37
r8169 0000:04:00.0 enp4s0: renamed from eth0
usb 5-1: new high-speed USB device number 2 using xhci_hcd
usb 8-2: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
usb 5-1: New USB device found, idVendor=050d, idProduct=0234, bcdDevice= 1.00
usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 5-1:1.0: USB hub found
hub 5-1:1.0: 4 ports detected
usb 3-1: new full-speed USB device number 2 using ohci-pci
usb 8-2: New USB device found, idVendor=0bda, idProduct=0301, bcdDevice= 1.30
usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 8-2: Product: USB3.0 Card Reader
usb 8-2: Manufacturer: Realtek
usb 8-2: SerialNumber: 201006010301
usb-storage 8-2:1.0: USB Mass Storage device detected
scsi host8: usb-storage 8-2:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
ata5: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
usb 5-2: new full-speed USB device number 3 using xhci_hcd
usb 3-1: New USB device found, idVendor=0451, idProduct=2046, bcdDevice= 1.25
usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 4 ports detected
ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: ATA-9: ST1000DM003-1ER162, CC45, max UDMA/133
ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata3.00: ATA-9: ST1000DM003-1CH162, CC47, max UDMA/133
ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata2.00: configured for UDMA/133
ata3.00: configured for UDMA/133
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: ATAPI: ATAPI   iHAS124   E, 4L08, max UDMA/100
ata4.00: configured for UDMA/100
ata1.00: ATA-8: KINGSTON SV300S37A120G, 521ABBF0, max UDMA/133
ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      KINGSTON SV300S3 BBF0 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 1:0:0:0: Direct-Access     ATA      ST1000DM003-1ER1 CC45 PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 1:0:0:0: [sdb] 4096-byte physical blocks
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
scsi 2:0:0:0: Direct-Access     ATA      ST1000DM003-1CH1 CC47 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 2:0:0:0: [sdc] 4096-byte physical blocks
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
 sdc: sdc1
sd 2:0:0:0: [sdc] Attached SCSI disk
scsi 3:0:0:0: CD-ROM            ATAPI    iHAS124   E      4L08 PQ: 0 ANSI: 5
tsc: Refined TSC clocksource calibration: 3890.256 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x7026ca3a93f, max_idle_ns: 881590760163 ns
clocksource: Switched to clocksource tsc
usb 5-2: New USB device found, idVendor=040d, idProduct=3400, bcdDevice= 1.00
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-2: Product: VX1
usb 5-2: Manufacturer: TOPPING
usb 5-1.1: new full-speed USB device number 4 using xhci_hcd
 sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
sr 3:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
sr 3:0:0:0: Attached scsi generic sg3 type 5
random: fast init done
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
usb 5-1.1: New USB device found, idVendor=0d8c, idProduct=0134, bcdDevice= 1.00
usb 5-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1.1: Product: USB PnP Audio Device
usb 5-1.1: Manufacturer: C-Media Electronics Inc.
usb 3-1.3: new low-speed USB device number 3 using ohci-pci
usb 1-2: new high-speed USB device number 3 using ehci-pci
usb 3-1.3: New USB device found, idVendor=046d, idProduct=c077, bcdDevice=72.00
usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1.3: Product: USB Optical Mouse
usb 3-1.3: Manufacturer: Logitech
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1.3/3-1.3:1.0/0003:046D:C077.0001/input/input2
hid-generic 0003:046D:C077.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:12.0-1.3/input0
usb 1-2: New USB device found, idVendor=03f0, idProduct=7d11, bcdDevice= 1.00
usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-2: Product: Photosmart Premium C309g-m
usb 1-2: Manufacturer: HP
usb 1-2: SerialNumber: CN05C1823905D7
usb-storage 1-2:1.3: USB Mass Storage device detected
scsi host9: usb-storage 1-2:1.3
hid-generic 0003:0D8C:0134.0002: No inputs registered, leaving
hid-generic 0003:0D8C:0134.0002: hidraw1: USB HID v1.11 Device [C-Media Electronics Inc. USB PnP Audio Device] on usb-0000:00:10.0-1.1/input2
input: TOPPING VX1 as /devices/pci0000:00/0000:00:10.0/usb5/5-2/5-2:1.2/0003:040D:3400.0003/input/input4
hid-generic 0003:040D:3400.0003: input,hidraw2: USB HID v1.00 Device [TOPPING VX1] on usb-0000:00:10.0-2/input2
usb 5-1.2: new low-speed USB device number 5 using xhci_hcd
usb 5-1.2: New USB device found, idVendor=046a, idProduct=0021, bcdDevice= 0.20
usb 5-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
input: HID 046a:0021 as /devices/pci0000:00/0000:00:10.0/usb5/5-1/5-1.2/5-1.2:1.0/0003:046A:0021.0004/input/input5
hid-generic 0003:046A:0021.0004: input,hidraw3: USB HID v1.11 Keyboard [HID 046a:0021] on usb-0000:00:10.0-1.2/input0
input: HID 046a:0021 Consumer Control as /devices/pci0000:00/0000:00:10.0/usb5/5-1/5-1.2/5-1.2:1.1/0003:046A:0021.0005/input/input6
scsi 8:0:0:0: Direct-Access     Generic- USB3.0 CRW-CF/MD 1.00 PQ: 0 ANSI: 6
scsi 8:0:0:1: Direct-Access     Generic- USB3.0 CRW-SM/xD 1.00 PQ: 0 ANSI: 6
scsi 8:0:0:2: Direct-Access     Generic- USB3.0 CRW-SD    1.00 PQ: 0 ANSI: 6
scsi 8:0:0:3: Direct-Access     Generic- USB3.0 CRW-MS    1.00 PQ: 0 ANSI: 6
input: HID 046a:0021 System Control as /devices/pci0000:00/0000:00:10.0/usb5/5-1/5-1.2/5-1.2:1.1/0003:046A:0021.0005/input/input7
hid-generic 0003:046A:0021.0005: input,hidraw4: USB HID v1.11 Device [HID 046a:0021] on usb-0000:00:10.0-1.2/input1
scsi 8:0:0:4: Direct-Access     Generic- USB3.0 CRW-SD/MS 1.00 PQ: 0 ANSI: 6
sd 8:0:0:0: Attached scsi generic sg4 type 0
sd 8:0:0:1: Attached scsi generic sg5 type 0
sd 8:0:0:2: Attached scsi generic sg6 type 0
sd 8:0:0:3: Attached scsi generic sg7 type 0
sd 8:0:0:4: Attached scsi generic sg8 type 0
sd 8:0:0:4: [sdh] Attached SCSI removable disk
sd 8:0:0:3: [sdg] Attached SCSI removable disk
sd 8:0:0:0: [sdd] Attached SCSI removable disk
sd 8:0:0:1: [sde] Attached SCSI removable disk
sd 8:0:0:2: [sdf] Attached SCSI removable disk
scsi 9:0:0:0: Direct-Access     HP       Photosmart Premi 1.00 PQ: 0 ANSI: 5
sd 9:0:0:0: Attached scsi generic sg9 type 0
sd 9:0:0:0: [sdi] Attached SCSI removable disk
raid6: sse2x4   gen()  6742 MB/s
raid6: sse2x4   xor()  6373 MB/s
raid6: sse2x2   gen() 10623 MB/s
raid6: sse2x2   xor()  7801 MB/s
raid6: sse2x1   gen()  7159 MB/s
raid6: sse2x1   xor()  4848 MB/s
raid6: using algorithm sse2x2 gen() 10623 MB/s
raid6: .... xor() 7801 MB/s, rmw enabled
raid6: using ssse3x2 recovery algorithm
xor: automatically using best checksumming function   avx       
Btrfs loaded, crc32c=crc32c-intel
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Created slice System Slice.
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
systemd-journald[487]: Received request to flush runtime journal from PID 1
systemd-journald[487]: File /var/log/journal/aaa642a1efb049fba8d6ca0c8d22ff0a/system.journal corrupted or uncleanly shut down, renaming and replacing.
snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002)
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
IPMI message handler: version 39.2
ipmi device interface
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x11/0x0
snd_hda_codec_realtek hdaudioC0D0:    inputs:
snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
mc: Linux media interface: v0.10
input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
usbcore: registered new interface driver snd-usb-audio
asus_wmi: ASUS WMI generic driver loaded
asus_wmi: Initialization: 0x0
asus_wmi: BIOS WMI version: 0.9
asus_wmi: SFUN value: 0x0
eeepc-wmi eeepc-wmi: Detected ASUSWMI, use DCTS
input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input13
asus_wmi: Number of fans: 1
cryptd: max_cpu_qlen set to 1000
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
nvidia: loading out-of-tree module taints kernel.
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia: module verification failed: signature and/or required key missing - tainting kernel
nvidia-nvlink: Nvlink Core is being initialized, major device number 237
nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module  435.21  Sun Aug 25 08:17:57 CDT 2019
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
MCE: In-kernel MCE decoding enabled.
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms  435.21  Sun Aug 25 08:07:52 CDT 2019
[drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 0
random: crng init done
random: 9 urandom warning(s) missed due to ratelimiting
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input14
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input15
usblp 1-2:1.1: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0x7D11
usbcore: registered new interface driver usblp
nvidia-uvm: Loaded the UVM driver, major device number 235.
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000c0000-0x000dffff window]
caller os_map_kernel_space.part.13+0x6d/0x80 [nvidia] mapping multiple BARs
audit: type=1400 audit(1592947465.505:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=999 comm="apparmor_parser"
audit: type=1400 audit(1592947465.505:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=999 comm="apparmor_parser"
audit: type=1400 audit(1592947465.505:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=999 comm="apparmor_parser"
audit: type=1400 audit(1592947465.509:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=1000 comm="apparmor_parser"
audit: type=1400 audit(1592947465.509:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=996 comm="apparmor_parser"
audit: type=1400 audit(1592947465.509:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=996 comm="apparmor_parser"
audit: type=1400 audit(1592947465.509:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=1001 comm="apparmor_parser"
audit: type=1400 audit(1592947465.509:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=997 comm="apparmor_parser"
audit: type=1400 audit(1592947465.509:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=997 comm="apparmor_parser"
audit: type=1400 audit(1592947465.509:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=997 comm="apparmor_parser"
Generic Realtek PHY r8169-400:00: attached PHY driver [Generic Realtek PHY] (mii_bus:phy_addr=r8169-400:00, irq=IGNORE)
r8169 0000:04:00.0 enp4s0: Link is Down
resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000c0000-0x000dffff window]
caller os_map_kernel_space.part.13+0x6d/0x80 [nvidia] mapping multiple BARs
usblp0: removed
usblp 1-2:1.1: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0x7D11
r8169 0000:04:00.0 enp4s0: Link is Up - 1Gbps/Full - flow control off
IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready
systemd-journald[487]: File /var/log/journal/aaa642a1efb049fba8d6ca0c8d22ff0a/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.

Return To AMD A8-6600K APU - Gigabyte NVIDIA GeForce GT 1030 System Information